Product Description

Cast Iron Reducer Transmission Double Enveloping Worm Gearbox 

Description:
Model: C100 – 500
Ratio: 10.25 – 63
Output Torque : 683 – 51180 N.m
Rating Power : 1/4HP(0.18 Kw) – 600HP(450Kw)

SGR C series double enveloping worm gear reducer use High torque Gearbox design by SGR’s Professional R&D team, it has straight-sided forms on both gear teeth and worm threads with this form tangent to a common base circle. and SGR double enveloping worm gear reducer awarded by the National Speed Reducer & Variator Industry Association .
it has different involutes or curved tooth forms, Multi-tooth meshed, allowed CZPT load , so CZPT worm gearbox  has higher driving efficiency than traditional worm gear .
double enveloping worm gear reducer is suit for high reduction ratio, without  install space constraints , and provision of using many different gears type . double enveloping worm gear can reach to 200:1 ratio . improve gearbox torque , Increasing loading capacity , At the same time  , SGR double enveloping worm gearbox use fans or cooling pipe [*1*]to slove heat generated during gear unit running for Long life service period .
The advantage of  SGR double enveloping worm gearbox , first advantage is CZPT use four-axis linkage  technology , second is CZPT ensure  worm gear reducer long life and high reliability design , and Perfect quality controlling system, strict inspection  . Besides , SGR also can special design base various requirement
High torque double enveloping worm gearbox adjust toughest working condition , and CZPT offer state of the art technology and quality solutions for Metal cutting and forming machinery ,Mining and construction equipment ,Paper and plastic converting machinery etc high power density, designed for heavy duty application .

Dtasheet of CUW :

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
C_ 100 28 190 48 1.41~11.5 10 ~ 62 683-1094 42
C_ 125 32 225 55 2.42~19.7 10 ~ 62 1170~2221 65
C_ 140 38 255 65 3.94~25.9 10 ~ 62 1555 ~ 3473 85
C_ 160 42 290 70 4.39~35.7 10 ~ 62 2143 ~4212 120
C_ 180 48 320 80 5.83~47.5 10 ~ 62 2812 ~ 5387 170
C_ 200 55 350 90 7.52 ~61.2 10 ~ 62 3624 ~6859 220
C_ 225 60 390 100 9.9~81.4 10 ~ 62 4872 ~ 9224 290
C_ 250 65 430 110 12.9 ~105 10 ~ 62 6284~11892 380
C_ 280 70 480 120 16.9 ~ 138 10 ~ 62 8347 ~ 15820 520
C_ 315 75 530 140 22.5 ~183 10 ~ 62 11068~ 19450 700
C_ 355 80 595 150 30~245 10 ~ 62 14818 ~28014  1030
C_ 400 90 660 170 32.1 ~261 10 ~ 62 15786~29918 1400
C_ 450 100 740 190 42.6 ~347 10 ~ 62 2571~39881 1980
C_ 500 110 815 210 54.9 ~ 448 10 ~ 62 27097~51180 2700

 

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step
Samples:
US$ 2000/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

worm gearbox

Common Problems and Troubleshooting for Worm Gearboxes

Worm gearboxes, like any mechanical component, can experience various issues over time. Here are some common problems that may arise and possible troubleshooting steps:

  • Overheating: Overheating can occur due to factors such as inadequate lubrication, excessive loads, or high operating temperatures. Check lubrication levels, ensure proper ventilation, and reduce loads if necessary.
  • Noise and Vibration: Excessive noise and vibration may result from misalignment, worn gears, or improper meshing. Check for misalignment, inspect gear teeth for wear, and ensure proper gear meshing.
  • Leakage: Oil leakage can be caused by damaged seals or gaskets. Inspect seals and gaskets, and replace them if necessary.
  • Reduced Efficiency: Efficiency loss can occur due to friction, wear, or misalignment. Regularly monitor gearbox performance, ensure proper lubrication, and address any wear or misalignment issues.
  • Backlash: Excessive backlash can affect precision and accuracy. Adjust gear meshing and reduce backlash to improve performance.
  • Seizure or Binding: Seizure or binding can result from inadequate lubrication, debris, or misalignment. Clean the gearbox, ensure proper lubrication, and address misalignment issues.
  • Worn Gears: Worn gear teeth can lead to poor performance. Regularly inspect gears for signs of wear, and replace worn gears as needed.
  • Seal Wear: Seals can wear over time, leading to leakage and contamination. Inspect seals regularly and replace them if necessary.

If you encounter any of these problems, it’s important to address them promptly to prevent further damage and maintain the performance of your worm gearbox. Regular maintenance, proper lubrication, and addressing issues early can help extend the lifespan and reliability of the gearbox.

worm gearbox

Does a Worm Reducer Require Frequent Maintenance?

Worm reducers generally require less frequent maintenance compared to some other types of gearboxes due to their design and operating characteristics. However, maintenance is still essential to ensure optimal performance and longevity. Here are some key points to consider:

  • Lubrication: Proper lubrication is crucial for worm gearboxes. Regularly check the lubricant level and quality to prevent wear and overheating. Lubricant should be changed as recommended by the manufacturer.
  • Inspections: Periodically inspect the gearbox for signs of wear, damage, or oil leaks. Check for any unusual noises, vibrations, or changes in performance that could indicate a problem.
  • Tightening and Alignment: Check and tighten any loose fasteners and ensure that the gearbox is properly aligned. Misalignment can lead to increased wear and reduced efficiency.
  • Seal Maintenance: Inspect and maintain seals to prevent oil leakage and contaminants from entering the gearbox.
  • Cleaning: Keep the gearbox clean from debris and contaminants that could affect its performance. Regular cleaning can prevent premature wear and damage.
  • Load and Speed: Ensure that the gearbox is operating within its rated load and speed limits. Exceeding these limits can lead to accelerated wear and potential failure.
  • Environmental Conditions: Consider the operating environment of the gearbox. Extreme temperatures, humidity, and other factors can impact the gearbox’s performance and longevity.

While worm gearboxes are known for their durability and self-locking feature, neglecting maintenance can lead to premature wear, reduced efficiency, and potential breakdowns. Following the manufacturer’s recommendations for maintenance intervals and procedures is essential to keep the worm reducer in optimal condition.

worm gearbox

How to Select the Right Worm Gearbox for Your Application

Selecting the right worm gearbox for your application involves careful consideration of various factors:

  • Load Requirements: Determine the torque and load requirements of your application to ensure the selected gearbox can handle the load without compromising performance.
  • Speed Reduction: Calculate the required gear reduction ratio to achieve the desired output speed. Worm gearboxes are known for high reduction ratios.
  • Efficiency: Consider the gearbox’s efficiency, as worm gearboxes typically have lower efficiency due to the sliding action. Evaluate whether the efficiency meets your application’s needs.
  • Space Constraints: Assess the available space for the gearbox. Worm gearboxes have a compact design, making them suitable for applications with limited space.
  • Mounting Options: Determine the mounting orientation and configuration that best suits your application.
  • Operating Environment: Consider factors such as temperature, humidity, and exposure to contaminants. Choose a gearbox with appropriate seals and materials to withstand the environment.
  • Backlash: Evaluate the acceptable level of backlash in your application. Worm gearboxes may exhibit more backlash compared to other gear types.
  • Self-Locking: If self-locking capability is required, confirm that the selected gearbox can prevent reverse motion without the need for external braking mechanisms.
  • Maintenance: Consider the maintenance requirements of the gearbox. Some worm gearboxes require periodic lubrication and maintenance to ensure proper functioning.
  • Cost: Balance the features and performance of the gearbox with the overall cost to ensure it aligns with your budget.

Consult with gearbox manufacturers or experts to get recommendations tailored to your specific application. Testing and simulations can also help validate the suitability of a particular gearbox for your needs.

China Good quality Cast Iron Reducer Transmission Double Enveloping Worm Gearbox   with high quality China Good quality Cast Iron Reducer Transmission Double Enveloping Worm Gearbox   with high quality
editor by CX 2023-09-08